news | online shop | events | theory | contact > 0 euros
Brands
Analogue Solutions
Analogue Systems
CME
Cwejman
Cycling 74
Dave Smith Instruments
Doepfer
Elektron
Eowave
Flame
Future Retro
HDB audio
Jomox
Keith McMillen Instruments
Kenton
KNAS
Livewire
Macbeth
Make Noise
Malekko
Manikin
Metasonix
MFB
Midi Solutions
Mini Monster
Moog
NEO instruments
OTO MACHINES
PlanB
Radikal Technologies
Roger Linn Design
Schippmann Music
Sherman
Spectral Audio
Studio Electronics
Synthesis Technology
Synthetic Music Systems
The Harvestman
TipTop Audio
Tom Oberheim
Vermona
Waldorf
WMD
Categories
effects
drum machine
synthesizers
softwares
interfaces
accessories
sequencer
merchandising
modular synthesizers
modular modules
cables
controller
sensors
actuators
guitars
browse other interfaces ?
>Eobody2 Live Sensor Controller Pack
>R2M
>

Doepfer MTC POWER
doepfer_b_mtc_power price : 138 € inc.VAT
in stock

add to cart
The MTC Power Board is an expansion board for the universal MIDI control electronics MTC64. It is used to switch mains voltages (230V/115V) to drive mains voltage devices. For example lamps or other mains loads can be controlled by MIDI note on/off messages. These are the most important features: 16 power outputs 115V or 230V max. 2A for each output (i.e. 460 Watt/VA @ 230V resp. 230Watt/VA @ 115V) max. total load for all outputs 16 A, i.e. 1A for each ouput in case of equal loads for all outputs (= 115 Watt/VA @ 115V resp. 230Watt/VA @ 230V) zero crossing switches to reduce mains interferences separate fuse for each output mains and load connections via screw terminals up to four MTC power boards can be connected to one MTC64 main board connection between MTC power boards and MTC64 main board via one 10 pin ribbon cable leading from the main board to all power boards, and a 16 pin ribbon cable between main board and power board (one for each power board). Please specify how many power boards have to be connected to the main board (because of the lenght and number of female connectors of the 10 pin ribbon cable) ribbon cables are included with the power board, cables for mains and loads connection are not included On the main board the integrated circuits labelled CD4094 have to be replaced by 74HC4094 (valid only if an already existing older main board manufactured before 2005 is used, in case of new orders of main boards in combination with power boards the main boards are already equipped with 74HC4094) Installation and wiring of the MTC power board has to be carried out by qualified personnel only because of electrical safety (dangerous mains voltage 115V / 230V). Not qualified personell is not allowed to install and run the MTC power board ! DANGER TO LIFE ! The user has to read the installation manual carefully and follow all instructions in the manual meticulously ! The complete construction has to be mounted into an isolating case before the mains voltage is applied.

> tech specs

> interesting links
manufacturer's web site

ModularSquare is a member of MESI Group - copyright 2005-2012
reseller of famous selected brands

Jomox Roger Linn Design Dave Smith Instruments Elektron Future Retro Moog Doepfer Mfb Sherman Radikal Technologies Studio Electronics Midi Solutions Kenton Vermona Eowave Cycling 74 Analogue Solutions Macbeth Analogue Systems HDB Audio Metasonix Spectral Audio Cwejman Curetronic Mini Monster Livewire Planb Manikin Schippmann Music Synthetic Music Systems Waldorf Flame Malekko TipTop Audio Make Noise CME Keith McMillen Instruments Tom Oberheim WMD OTO MACHINES NEO instruments KNAS The Harvestman Synthesis Technology