Eowave Position Sensors are resistive ribbons. This device outputs the voltage corresponding to the position with 2,5kohm/100mm. This technology allows an infinite accuracy. For musical applications, controlling the pitch with a position ribbon will make a perfect continuous controller for glissandos and other theremin-like effects!Eowave 10 cm position ribbon is like a linear potentiometer sensing position. It can be associated to any MIDI parameters but associated to the pitch, it will be a great ribbon controller. These 10 cm ribbon are also perfect to emulate faders.You've always wanted to control or trigger some parameters of your MIDI software
instrument with a ribbon ? Just connect the Eomono to your computer and it will be recognized as an audio
device. Per default CC1 is sent to MIDI channel 1, but you may set it differently with
Eomono editor.
> tech specs
- 1 USB I/O
- 1 10cm position sensor
- USB cable length: 2 meters
- Measured parameter: Position
- Sensing technology: Resistor bridge
- Range: 10 cm long
- Output format: Continuous 0 to 127 (1024) for a bit depth of 7 (10)
- Size: 22 mm wide (see range)
- Weight: 50 g
- Operating temperature range: Standard
- Wiring: 6.35 mm TRS jack, 2 m-long cable
- Power: Built-in phantom 5V DC
Eomono
- Input resolution : up to 10 bit
- Output : USB
- Hi-speed USB
Non-volatile memory
USB Pedal Editor : PC, Mac compatible
Compatible MIDI protocole
USB bus powered
Message format types: Control change/Note on/
Pitch bend/Monophonic aftertouch
Inverse feature
edition via SYSEX or via the editor
|
