APPLICATIONS
Industry
Servomotors
Amusement equipment
Music Live control
A plug&play one-to-one USB 46mm pressure sensor to use directly with your music softwares. It's 100% MIDI compatible. No MIDI interface needed.
Eowave pressure sensors are force sensing resistors. Force Sensing Resistors (FSRs) are robust, polymer thick film (PTF) devices that exhibit a decrease in resistance when increased pressure is applied to the surface of the sensor. This force sensitivity is optimized for use in human touch control of electronic devices such as automotive electronics, medical systems and industrial PCs. They are more appropriate for qualitative rather than precision measurements. These sensors will easily make continuous buttons dimmer-like on any control surface. You've always wanted to control or trigger some parameters of your MIDI software
instrument with a pressure pad It?s now possible and easy with Eowave Eomono!
Just connect the USB Eomono to your computer and it will be recognized as an audio
device. Per default CC1 is sent to MIDI channel 1, but you may set it differently with
Eomono editor.
> tech specs
- Measured parameter: Pressure
- Sensing technology: FSR (Force Sensing Resistor)
- Range: From 10 g to 10 kg
- Output format: Continuous 0 to 127 (1024) for a bit depth of 7 (10)
- Size: 46 mm sized square
- Weight: 45 g
- Operating temperature range: Standard
- Wiring: 6.35 mm TRS jack, 2 m-long cable
- Power: Built-in phantom 5V DC
Eomono
- Input resolution : up to 10 bit
- Output : USB
- Hi-speed USB
Non-volatile memory
USB Pedal Editor : PC, Mac compatible
Compatible MIDI protocole
USB bus powered
Message format types: Control change/Note on/
Pitch bend/Monophonic aftertouch
Inverse feature
edition via SYSEX or via the editor
|
