The MF-102 Ring Modulator is an award winning effect designed by Bob Moog. It contains an analog Ring Modulator with a built in Carrier Oscillator and LFO. Used with guitars, basses, keyboards, samples, or recorded tracks, the MF-102 can create subtle, or completely over-the-top effects. Uncontaminated by the digital world!
> tech specs
FREQUENCY rotary control, which varies the carrier frequency over a six-octave range.
* RATE rotary control, which varies the LFO’s frequency from 0.1 Hz to 25 Hz.
* LFO AMOUNT rotary control, which adjusts the amount that the LFO output sweeps the carrier oscillator.
* MIX rotary control, which crossfades continuously from unmodulated to modulated audio.
* DRIVE rotary control, which adjusts the gain of the audio input.
* SQUARE-SINE rocker switch, which chooses the LFO waveform.
* LO-HI rocker switch, which chooses between the low frequency carrier range (2 Hz to 130 Hz) and the high frequency carrier range (60 Hz to 4,000 Hz).
* LEVEL, a three-color LED that is used to set the DRIVE control.
* LFO, a LED that indicates the LFO rate.
* BYPASS, a two-color LED that tells whether the ring modulator is on or bypassed.
* ON/BYPASS, a rugged, smooth-acting ‘stomp switch.’
AUDIO IN 1/4" phone jack - accepts any instrument-level or line-level audio signal from -16 dBm to +4 dbm.
* AUDIO OUT 1/4" phone jack - -4 dBm nominal output level.
* FREQUENCY, RATE, LFO AMOUNT, MIX, all of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks.
* AUX AUDIO IN - provides a means of applying an external signal to the ring modulator, in place of the carrier oscillator.
* LFO OUT jack - delivers the LFO voltage for use by other voltage-controlled devices.
* CARRIER OUT jack - delivers the carrier signal for use by other devices.
* +9V POWER INPUT jack - accepts standard 9 volt power adaptors (power adaptor included).
|
