The new 'Z' from Moog Music is a 1000 msec totally analog delay. One Full Second of analog delay time makes the MF-104Z the longest standalone analog delay module on the market. That’s exciting but the reason many of you have been clamoring for Moog to build a delay (again) is the unmistakable sound, quality, and flexibility of this newest Moogerfooger.
> tech specs
DELAY TIME rotary control, which adjusts the delay time from slightly less than 50 milliseconds to 500 msec in the SHORT position; 100 msec to slightly more than 1000msec (1 second) in the LONG position.
* MIX rotary control, which adjusts the mix between the direct and the delayed signals.
* FEEDBACK rotary control, which adjusts the amount of delayed signal that is fed back to the input.
* INT. LOOP-EXT. LOOP switch routes the feedback either directly or through an external effects processor that you hook up. For example, inserting the MF-102 Ring Modulator in the feedback loop will create echoes that change timbre as they die out.
* DRIVE rotary control, which adjusts the gain of the audio input to the delay.
* OUTPUT LEVEL rotary control, which balances the delayed signal with the bypassed signal.
* LOOP GAIN rotary control, which sets the gain of the external feedback loop.
* LEVEL, a three-color LED that is used to set the DRIVE control.
* LOOP LEVEL, a LED that aids in setting the external loop level.
* BYPASS, a two-color LED that tells whether the delay is active or bypassed.
* ON/BYPASS, a rugged, smooth-acting ‘stomp switch.’
Jack Panel Features
* AUDIO IN 1/4" phone jack - accepts any instrument-level or line-level audio signal.
* MIX OUT 1/4" phone jack - delivers the delayed and the direct signals, depending on the setting of the MIX control.
* DELAY OUT 1/4" phone jack - delivers just the delayed signal.
* TIME, MIX, FEEDBACK, all of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks.
* LOOP IN - 1/4" phone jack - provides access to the feedback loop for connecting an external processor.
* LOOP OUT 1/4" phone jack - provides access to the feedback loop for connecting an external processor.
* +9V POWER INPUT jack - accepts standard 9 volt power adaptors (power adaptor included).
General Specifications
* CASE: Black panel with hardwood sides - classic analog appearance.
* DIMENSIONS: 9" x 6" x 2-1/2"
* NET WEIGHT: 3 lb
* SHIPPING WEIGHT: 5 lb, including power adaptor and instruction manual.
* POWER REQUIREMENTS: 105-125 volt, 5W or 220 volt power adaptors available.
|
