The VERMONA RM-1 is an analog ring modulator with many controls and connecting features, built as a standalone device in a single rack space enclosure (1U).
A ring modulator outputs the sum and difference of the frequencies from two input signals.
If you feed a ring modulator with a 500Hz sine wave and a second sine wave with a frequency of 100Hz, at the output you will get a 400Hz sine wave (500Hz - 100Hz) and a 600Hz sinewave (500Hz + 100Hz). A ring modulator always needs two signals to work.
The RM-1 is equipped with an internal oscillator that generates a "carrier" signal. The waveshape of this oscillator can be smoothly faded from sine to triangle. The oscillator's frequency can be adjusted in a range from 0,5Hz up to 5kHz and can be modulated by three modulation sources simultaneously:
envelope follower
external control voltage or volume pedal
internal LFO
When connecting a control voltage with a 1V/octave characteristic, you can play it tuned in a three octave range. Alternatively, you can insert an external carrier signal to the RM-1.
The RM-1's LFO has a range of 0,05 Hz - 50 Hz. Its speed and intensity can be adjusted by two controls as well as by an external control voltage. It has four waveforms: triangle, square, positive and negative saw. The LFO signal can also be used to modulate other devices (i.e. DAF-1 or PH-16).
> tech specs
The RM-1 has an input on the front panel and one on the rear panel.
On the rear panel you also find the CARRIER IN/OUT jack and numerous CV inputs and outputs. All CV inputs can also be used with volume pedals, because the RM-1 can produce the necessary conotrol voltage on its own.
The RM-1 has an internal power supply.
type: analog ringmodulator
input section: front- and rear input for modulator signal; GAIN and DRIVE controller
carrier oscillator: VCO with 1V/octave characteristic; sine and triangle waveform; frequency: 0,5Hz to 5kHz
modulation: LFO with four waveforms (ramp up/down, triangle, square);
envelope follower: modulates the carrier oscillator's frequency (positive or negative);
external CV / Pedal input
CV-inputs: LFO intensity, LFO speed, MIX
CV-outputs: LFO, carrier
housing: 19" 1U; internal power supply |
