DMF-2

The DMF-2 module consists of two identical filters with two modes: lowpass and a quasi-bandpass which are available simultaneously at separate outputs. Each filter works selectively with different filter slopes and allows overdriven sound by saturation. By lots of in- and output combinations the module can be used as two independent filters or as a parallel dual filter.

Each filter features resonance up to self-oscillation. The lowpass is switchable between the classic 24dB and a 36dB slope, the bandpass is a combination of 6dB highpass and 24dB lowpass. The volume control sets the audio level at the input up to saturation which grade is shown by LEDs. Additionally to the each filter´s separate sockets there are in- and outputs which address both filters simulaneously or carry this audio signal.

Per filter:
• 2x Cutoff CV in (CM),
• 1x resonance CV in (Q-Peak),
• 1x audio input,
• bandpass output,
• lowpass output.

Common sockets for both filters:
• master cutoff CV input (CM A+B),
• audio input (A+B),
• A+B bandpass output,
• A+B lowpass output.