VCA Matrix

16 VCAs, 4×4 matrix, CV and audio.

385,00  TTC

Availability: Out of stock
Comparer
SKU: 4MS011 Categories: , Tags: , , Brand:

The VCA Matrix from 4ms is a playable 4×4 matrix of 16 VCAs. The four audio/CV inputs can be routed and mixed in any combination to the four outputs, with independent CV control of each VCA.

Features :
• 4 CV/audio inputs and 4 outputs (buffered and dc-coupled)
• Full range (0Hz – 20kHz) for both Control and Signal inputs, allows for AM effects, etc.
• 16 VCA’s using high quality SSM chips
• Attenuation/gain range from -100dB (mute) to 0dB (unity). Up to +20dB boost with trimpot adjustment.
• Playable surface with 16 latching Mute LED buttons, used to mute each VCA individually (Mute button disconnects Control jack and Level knob, and fully attenuates the VCA)
• LED button brightness indicates amount of attenuation and Control CV signal
• 16 Control jacks for VCA level control
• 16 Level knobs attenuate the incoming Control signals. The Level knobs act as manual level controls when nothing is plugged into the Control jack
• Exponential VCA response in low control voltage range, pseudo-log response in higher voltage range.
• “Soft Limit” effect limits gain to prevent clipping, while still responding to higher Control voltages with more “punch” and wider pulses
• Matrix Expandability: VCA Matrices can be connected to form a larger matrix using headers on the back (4×8, 8×8, 12×4, etc)
• Control Expandability: 16-pin header on back side of PCB allows an external device to control all VCAs: e.g. patch recall, patch sequencing, preset patterns such as quadrature panning, etc.
• Suitable as a 4×4 mixer, splitter, dynamic signal router, limited waveshaper, etc.

• 26 HP Eurorack format module
• 1.6” (40mm) deep

http://www.4mspedals.com/vcam.php

Width

Current draw

Back to top
X