MTC64 is an universal MIDI interface that converts up to 64 succeeding MIDI note on/off or program change messages into 64 TTL voltages (0/+5V). The TTL outputs of the MTC64 can be used to control different switching functions. With suitable drivers (e.g. switching transistors) relays, lamps, motors, electromagnets, magnetic valves and so on can be controlled. A suitable driver board with 16 outputs (max. load 40V/500mA for each output) is available as option. Four of these boards are required to drive all 64 outputs of the MTC64. If you want to built your own driver board you will find a suitable driver circuit in our FAQ. For small loads (less than 5mA @ 5V, e.g.LEDs or high-impedance reed relays) the additional drivers may not be necessary.
We have available expansion units for the MTC64 main board to switch main loads (MTC Power Board) and we offer a universal Relay Board
Related products
1 695,00 €
A stand alone 49 note keyboard controller that transforms any modular synthesizer into a performance instrument. With its built in midi/cv converter, joystick and portamento ,single And multiple triggering features to name a few this best seller is ideal for arp 2600,moog 55, Roland 100m etc..for information on the fitted rs220 and rs330 see separate [...]