4U case

4U – 104HP case

359,00  TTC

Availability: Out of stock
Comparer
SKU: INT043 Category: Tags: , Brand:

This is a single row Eurorack module space (3U) with additional 1U row along the top for mounting all sorts of essential utility modules.
Super strong extruded aluminum design.
Highly resilient surface finish that has been anodized and sandblasted.
Threaded inserts allow for modules to be mounted with standard M3 screws, no sliding nuts!
Pairs of slots run along the three sides of the case. Each slot is sized to allow for M3 nuts or M3 Hex Head bolts to slide in the space. Perfect for attaching all sorts of interesting accessories and linking together multiple cases (both coming soon!)
A pair of custom extruded rubber “feet” come fitted on the bottom slots of the case. This rubber can be slid out when you remove an end cheek and then positioned on the front side of the case so that you can stand the cases vertically.
Power supply is mounted to a pair of inside bottom rails and can be re-positioned by loosening the fastening nuts and sliding the whole assembly left or right.

– Outside dimensions: 177.4 mm x 81.3 mm x 537.3 mm – Weight: 2.6 kg – Power: TPS30 MAX +12V output at 1.5A, -12V output at 1.5A, +5V output at 1A – Max. internal depth for modules: 70 mm – Internal depth for modules above the highest point of the power bus board: 53 mm

Dimensions17,74 × 8,13 × 53,76 cm
Width

Current draw

,

Depth

70mm, Internal depth for modules above the highest point of the power bus board: 53 mm

Back to top
X