Français
FAILLE TEMPORELLE
300,00 €
FAILLE TEMPORELLE is a self proclaimed “world’s first time warping distortion”, that can go from soft overdrive to extreme clipping distortion.
3 in stock
FAILLE TEMPORELLE is a self proclaimed “world’s first time warping distortion”, that can go from soft overdrive to extreme clipping distortion.
You’ll be able to go from the analog-ish lofi tape echo to a full garbage delay/looper and even achieve some chorus and reverbish results.
Despite the flexibility and possibilities that FAILLE TEMPORELLE can offer, it has a unique and yet recognizable tone, thanks to its input and output driving stage inspired by the sound of the old and obscure tape machines preamps from the 70s and its diode limiter !
PROXIMITY : Is the distance or time, between the original signal and the delayed one, the more you turn it clockwise, the more the 2 signals warp to create a karpul strong like tone.
TIME RANGE : Changes the rate of the echo/delay’s repetition, the more you turn the knob clockwise the more you can achieve a longer delay time. Also, more and more sweet noisy glitches and artifacts will be added to your sound.
FEEDBACK : The length of the echo/delay or the amount of distortion, also acts as a dry/wet send function…can’t say more if you’ve read the disclaimer already…
DRY OVERLOAD : Controls the first distortion stage, it’s a real distortion on itself, fully turned clockwise, the signal ducks the echo/delay, creating an aggressive sidechain effect. That function really likes HOT signals !
GAIN/CLIPPER : This knob acts as a threshold of the onboard diode limiter, working in tandem with the INPUT OVERLOAD. At low setting it acts as a soft distortion with a nice compressed vibe, and as a hard clipper when turned full clockwise.
IN LEVEL : The good starting point to find your desired sweet spot. With less signal going into the module; you can achieve a more wet effect, and the volume can then be adjusted using the “GAIN/CLIPPER control. On the other hand, if you feed more signals into it, you’ll venture into the heavy territory ! When voltage controlled, you can turn it to a VCA and Interesting dynamic effects such as tremolo can be achieved.
FDBCK MODE : Feedback mode switch, it changes the overall tone of the module and behavior of the feedback OPEN : The “normal” mode operation. NOISY : The dirtiest mode ! An extra layer of anharmonic noise on top? Say no more! CLOSE : Equalized and softer feedback.
PROXI.CV : Attenuator for the PROXIMITY CV input. Secret chorus with fast modulation!
TIME CV : Attenuator for the TIME CV input. Second secret chorus…
FEEDBACK CV : Attenuator for the FEEDBACK CV input.
LEVEL CV : Attenuator for the LEVEL CV input.
CONNECTIVITY :
INPUTS :
- IN : Audio input.
- FEEDBACK : CV input for controlling FEEDBACK.
- PROXIMITY : CV input for controlling PROXIMITY.
- TIME : CV input for controlling TIME.
- IN CV LEVEL : CV input for controlling IN LEVEL.
TECHNICAL INFOS:
Current consumption :
+12v : 62ma
-12v : 24ma
5v : 0ma
Width : 10hp
Depth : 24mm ( 33mm at power input )
Front Panel : 2mn Thick Aluminum, textured Black Paint with pseudo holographic effect
| Weight | 0,3 kg |
|---|
Related products
Aphelion packs a stereo distortion and low/high pass filter into a compact 8HP design.
This product has multiple variants. The options may be chosen on the product page
