A-106-5SE

Module A-106-5 SEM filter is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. center position) or more with A-100 standard signals like VCOs.

• Inputs: Audio In, CV In 1 without attenuator, CV In 2 with Polarizer
• Outputs: Bandpass Out, Low/Highpass Mix-Out
• Controls: Audio Attenuator, CV Polarizer, Frequency, Resonance, LP/HP Mix
• Date of delivery: ~ July 2007

• Width: 8HP
• Depth: 55 mm
• Current draw : 30mA

http://www.doepfer.de/a1065.htm